Answers

On this page you find some of the most frequently asked questions. The replies apply to all FLL teams in all FLL competitions in Central Europe.

M06 “Water treatment” binds

Last update on 2017-11-14 by Christine Widmann.

What shall I do if M06 “Water treatment” binds?

If the model binds a little, please try the following: Connect the axis again newly/slightly rotated. It might be helpful, too, to compress a little the two vertical grey braces, which lay a little more apart (the 2nd and the 3rd from the right) and to pull apart a very little the 1st and the 2nd braces from the right so that the gears behind can run freely. It is also good not to pull the white tank up to the stop.

Make sure the brown couplings in the back of the model are not being compressed by other LEGO® elements. This would cause many of the surrounding gears to not move as freely as they should.

Go back